Instructions d'installation

1. Préparation de l'outil

    The tools that need to be prepared first are screwdrivers, screws, and pens (for marking)

2. Faites une marque

    First, lay the glass door flat, mark the place where the handle of the glass door is to be installed in advance, and use an electric switch to install a diamond drill bit of the corresponding specification to make holes with water. At this time, you must pay attention to prevent the glass from breaking. If it is not tempered glass, use a 10mm glass drill to measure the hole distance of the handle (center to center) and mark it on the glass.

3. Jouez à la colle à verre

   Then, apply a little glass glue to the part where the handle is inserted into the glass. When the handle is assembled, its root is close to the glass, and then press the fixing screw to ensure that the handle is not loose.

4. Dévissez la vis

    Then, when installing the handle, start from the outside, and screw the long screw of the handle inside. Do not leave the screw of the handle outside, so that the handle can be removed from the outside. The connecting part of the handle should not be too tight when inserted into the hole, and should be slightly loose. . If the insertion is too loose, wrap the insertion part with soft tape